ModelSmart Pro 200

The ModelSmart Pro 200 is a desktop 3D printer that comes with a large print area. With the ModelSmart Pro 200 you can print models that are up to 200mm wide, with a depth and height of 150mm. This gives you the opportunity to print large-scale models. Check out our Model Library for some great ideas.

ModelSmart Pro 200
ModelSmart Pro 200 ModelSmart Pro 200 ModelSmart Pro 200

FILAMENT

Materials

With the ModelSmart Pro 200 you can use a variety of different materials to print with.
These include PLA and Wood filament.

PLA

PLA is an all-purpose plastic and is supplied in a variety of colours including silver.

Filament, Filament Cartridge, PLA

WOOD

Check out our Model Library for wooden model ideas.

Filament, Filament Cartridge, WOOD

Quality

All ST3Di filaments are produced using the highest quality raw material and to the most exacting standards, providing you with seamless and trouble-free printing. ST3Di filaments are only ever created from virgin material, which means it is free from impurities and in-turn won't block your extruder while you are printing.

Size

Here at ST3Di we like to think big. And that is why your ST3Di filament cartridges come with a whopping 750g of material on them! Go on, give it a go!

Helpful Printer Driver®

It doesn’t matter whether the object you are trying to print is large or small, complex or straightforward; the last thing you want is to run out of filament half way through the job. With the Helpful Printer Driver® you get real-time accurate filament levels, which not only show you what remains but will alert you when you are running close to the end of the reel*.

* Currently available on Windows 7 operating system only. Please keep an eye out for updates as more operating systems become available!

Z-axis sheets

Z-Axis sheets, 3D model adhesion, ModelSmart Pro 280

When printing on a 3D printer, the first layer of material is most important. It has to adhere to the print bed in a consistent and even application to ensure that the rest of the model sits on top correctly and isn’t out of alignment. Any small movement or imperfection could cause your print to not re-produce correctly.

That’s why ST3Di have created the Z-Axis sheets. These are a transparent adhesive material that is easy to apply to the print bed before each print. Your model then prints on top and when finished, you simply remove the glass bed from the printer (once it has cooled) and peel off the Z-Axis sheet. The model then also easily peels from the sheet leaving you with a smooth model.

So, no messy glue to use and no time consuming bed cleaning after each print. Simply apply your Z-Axis sheet and watch your model come to life!

Technical Specification

Extruder One
Layer Height 200 micron
Print Tolerance 0.2mm
Print Size (mm) 200(w) x 150(h) x 150(d)
Filament material PLA/Wood
Print area adhesion Z-Axis Sheets
Software ST3Di Edit and Helpful Printer Driver®
Auto Support Generation Yes
Guarantee 12-months
Speed (mm/s) 50
Filament Size 1.75mm
Operating Tool Easy-to-use LCD Control Panel
Illumination Brilliant white internal operating light